Bedrock SM50 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 39

Bedrock SM50 Скачать руководство пользователя страница 6

6

Bedrock SM50 operating manual

© Embedded Acoustics BV, 2015

The supplied charger includes adapters for use worldwide, and operates on
a wide AC-voltage range of 100 – 240V. Do not use the charger if the casing
appears cracked or broken, or if it has been exposed to fluids or moisture.
Contact with components inside the charger while this is plugged in may
result in serious injury or death.

Safety precautions related to connectors

The SM50 features a USB connector and an XLR connector (to which the
microphone is attached). If you connect external devices to these connec-
tors, please ensure that these connections are protected against overvoltage
and power surges. The voltage supplied to the USB port should not exceed
5.5V. As the USB power circuitry is connected to the battery pack, excessive
voltage applied to the USB port may cause the battery pack to catch fire or
explode.

The XLR connector supplies 48V phantom power to the microphone. This
phantom voltage can be switched on and off through the hardware settings
menu. IMPORTANT: connecting equipment not designed for 48V phan-
tom power to the SM50 XLR connector (with phantom power switched on)
will permanently damage the connected device and/or the SM50. The man-
ufacturer explicitly denounces responsibility for any damages to third-party
hardware resulting from exposure to the SM50’s phantom power.

«
...
4
5
6
7
8
...
»

Содержание SM50








































Отзывы:

Нет отзывов