bedfront piCO+ Smokerlyzer, Руководство по эксплуатации

Страница: 5 / 24

5
piCO
+
Operating Manual
English
Quick start guide
1
Turn on the monitor by holding down
the button for three seconds.
2
Attach a breath sampling D-piece and
new steribreath
TM
mouthpiece.
3
Inhale and double click button to start a
breath test.
4
Hold breath for the 15-second
countdown. If unable to hold breath
for full 15 seconds, see ‘Operation’,
page 10.
5
A beep will sound during the last three
seconds of the countdown.
6
Blow slowly into mouthpiece, aiming to
empty lungs completely.
7
The ppm and equivalent %
carboxyhaemoglobin (COHb) levels will
rise and hold. The coloured LEDs will
light accordingly. See the table on page
11 for an interpretation of the reading.
8
Remove the D-piece between tests to
purge the sensor with fresh air.
9
To repeat the breath test, double click the
button to return to main display and continue
from step two, above.
10
To switch off, hold button for 3 seconds.
Unit will auto power off after 5 minutes
of inactivity.