Start
1 (Bottom)
1 (Top)
16
16
16
16
4 (Top Back Rail)
6(Toe rail)
Edge Strip
Edge Strip
Edge Strip
Edge Strip
2 (Fix Shelf)
16
16
Edge Strip
Finish
1 (Bottom)
16
16
16
16
17
17
16
16
1 (Top)
16
16
17
17
16
16
16
2 (Fix Shelf)
16
Step 4
Fix shelf, top and bottom
Lay the top (1), bottom (1) and fix shelf (2) on a flat surface with holes facing up and
insert the cams (16) in holes with arrows pointing to the side as shown. Make sure to
push the cams (16) all the way in by gently tapping them with hammer.
Screw in the hardware pins (17) in the top and bottom shelf (1) as shown.
Step 5
Assembling cabinet ends,
shelves and rails
With the left cabinet end (8)
lying flat and with its melamine
edge facing toward the
assembler, fix the toe rail (6)
and top back rail (4) to the
cabinet end (8). Please make
sure that the melamine edge
on the top back rail faces toward
the bottom of the unit. It is also
recommended to use small
amount of glue in the dowel
holes prior to inserting rails.
Attach the top (1) and bottom (1)
to the cabinet end (8) making sure
that the edge strip faces toward the
front of the unit and cams are
facing toward the top of the unit.
Attach the fix shelf (2) to the cabinet
end with cams facing to the bottom
of the unit. Lock in place by rotating
cams (16) in clock wise direction by
180
0
using Allen Key (23).
Page 5 of 10
