background image

3

NObreath

®

 Operating Manual

English

www.bedfont.com

Warnings

 

Please read the manual before use.

 

Never use alcohol or cleaning agents 

containing alcohol or other organic 

solvents as these vapours will damage 

the electrochemical sensor inside.

 

Under no circumstances should the 

instrument be immersed or splashed 

with liquid.

 

The battery life is indicated by the 

 

icon.  When the 

 icon is displayed 

the batteries should be changed.

 

Breath tests must only be carried out 

with Bedfont accessories.  Failure to do 

so may cause incorrect readings.

 

The mouthpieces are single patient use 

only and can be used for a maximum 

of 3 tests.  Further re-use could cause 

incorrect readings and could increase 

the risk of cross infection.  The 

mouthpiece should be disposed of after 

use, in accordance with local waste 

disposal guidance.

 

Patients should exhale for the duration 

of time indicated by the monitor during a 

breath test.  Failure to do so may cause 

incorrect readings.

 

To ensure a breath sample is taken at 

the correct flow rate, the monitor must 

be held upright at all times during a 

breath test.  The ball in the NObreathFlo 

should be kept within the white band in 

the centre of the tube during a test.

 

The mouthpiece may become warm to 

the touch after use.

 

The NObreathFlo should be used for 

50 tests only, then disposed.  A new 

NObreathFlo is provided with each pack 

of 50 mouthpieces.

 

Do not block the exhaust port on 

the device at any time.  Blocking the 

exhaust port may cause erroneous 

readings.

 

The instrument should be set to zero 

every month. See page 10 for details.

 

See Bedfont’s infection control and 

maintenance guidelines for further 

information on infection control.

Contraindications

 

The sensor has some cross-sensitivities 

to breath gases.  These are low and 

should not affect readings.  Please 

contact Bedfont for more information.

Caution

 

Ensure the monitor is used within the 

temperature and relative humidity (Rh) 

range as stated in the Specification on 

page 4.

 

Portable and mobile RF communications 

equipment can affect the NObreath.

 

Federal law restricts this device to sale 

by or on the order of a physician (USA 

only).

Содержание NOBreath

















Отзывы: