14
Select the protocol for each patient; their
name will be shown at the top of the screen.
Select the protocol by pressing the protocol
name, for example ‘lactose’, when selected
the protocol will change to green. To edit
the protocol timings please see ‘edit testing
Protocols’ section of this manual.
Press the right arrow at the bottom of the
screen to progress to the next patient.
When the final protocol has been selected
and when selecting a patient during testing,
three options will appear for the first
patient. Their name will be shown at the top
of the screen.
To perform a breath test (please note: if this
is the base sample no substrate/sugar
should be given to patient before this point)
press and follow steps 4-8 of the ‘taking a
breath test’ section of this manual.
To perform a face mask test (please note: if
this is the base sample no substrate/sugar
should be given to patient before this point)
press and follow steps 3-6 of the ‘taking a
face mask test’ section of this manual.
