beddit Sleep Monitor, Руководство пользователя

Страница: 6 / 56

6
Important handling information
1. Do not wash the sensor. Doing
so will ruin your device and void
your warranty.
2. To wash the fabric sleeve, detach
the plug from the power adapter
and remove the sensor and
cable from the sleeve through
the slit on the dark, rubber side
of the sleeve. After the sensor
has been removed, it is safe to
clean the sleeve by hand wash
and air dry only. Do not wash
the sleeve in a washing machine
or dry it in a dryer. Doing so will
ruin it and void your warranty.
Be sure the sleeve is completely
dry before reinserting the sensor
into the sleeve.
3. When inserting the sensor into
the sleeve, the cable should
go through the long slit on
the sleeve’s dark, rubber side
and come out of the opening
at the end of the sleeve. The
black side of the cable (where
it meets the sensor) should
face down. If placed properly,
the sleep monitor will lie flat in
the sleeve.
4. When making your bed, use
caution to avoid damaging
the cable or the sensor. If you
have an adjustable mattress
or a rollaway bed, do not fold
the sleep monitor or its cable
into the bed.
5. Your Beddit Sleep Monitor
includes a power adapter. Using
the USB port on a laptop or
with other electronics could
result in damage to your sleep
monitor, electronics, or data.
6. Your Beddit Sleep Monitor
works best if no metallic (or
conductive) objects are placed
on top of the sensor, because
these may lead to inaccurate
results and false in-bed
detection.
7. Do not disassemble or attempt
to repair the sensor, cable, or
power adapter. If there is a
defect covered by the warranty,
we will replace the defective
part or refund your money.
See the warranty terms and
limitations.
Visit beddit.com/faq for additional
support.