7 of 30
Position one Swing Leg Plate (
Q
) at the front end of the Assembled Face, and
from the inside, insert the 1” tube
into the
1”
hole. Insert four
¾”
Wood
Screws (
H
) in the four pre-marked holes on the inside of the Assembled Face.
REPEAT THIS STEP ON THE OTHER SIDE OF THE ASSEMBLED FACE.
From the outside of the Assembled Face, push one 1½” Flat Head Cap Screw
(
R
) through the Swing Leg Plate (
Q
). Next, place one Thin, Black Nylon
Washer (
S
) on the 1½” Flat Head Cap Screw (
R
), on the inside of the
Assembled Face. REPEAT THIS STEP ON THE OTHER SIDE OF THE
ASSEMBLED FACE.
Using the picture above as a guide, place one Swing Leg (
P
) on the inside of
the Assembled Face, pushing it onto the
1½” Flat Head Cap Screw (
R
). Next,
place one Thin, Black Nylon Washer (
S
)
on the 1½” Flat Head Cap Screw (
R
).
Содержание ECONOMY MELAMINE MURPHY BED
Страница 30: ...30 of 30 APPENDIX A ...