Becx Machines WLA60, Руководство пользователя, Страница: 11 / 23

Loader arm
Type: WLA60
Version: 1
July 2019
Page 11 van 23
1
2 3
3.1. Attachment
Figure 2: Attachment plate
Figure 2 Part Explanation
1 Arm clamp

The actual support arm is attached by means of clamps on the
adapter plate. This is done with the two mounting bolts
2 Adapter plate

Using a minimum of 4 of the 12 fixing holes WLA60 can be
attached to almost any loader. It is preferred to us the holes
on the sides of the plate
3 Valve block
connection

If the version including control valve is provided, this is
located at the appropriate position. In the version without
valve block this section on the adapter plate is not present.