BECKWITH ELECTRIC M-2601, Инструкция

Страница: 59 / 70

1
3
A
B
C
7–8
M-2601/02/03 Instruction Book
Send – Sends the currently displayed informa-
tion to the control.
Cancel – Returns user to the SLIMcom main
window. Any changes to the displayed informa-
tion are lost.
Change Passwords Command
When the Change Passwords command is se-
lected, a Change Level Access Code dialog box
(see Figure 7-8
) is displayed. The access codes
in this menu are all four-digit decimal (0–9) com-
binations. If the correct password is entered, then
the corresponding level is achieved. If the user
is at level 2 or higher, then the “change pass-
word” will permit passwords to be changed. The
New Level Access Code and the Confirm Level
Access Code must be the same.
Figure 7-8 Change Level Access Code
Password Entry Command
Figure 7-9 Password Entry Submenu
When the Enter Passwords command is selected,
a Password Entry dialog (see Figure 7-9) is dis-
played. This menu contains three levels of pass-
words:
Level 1: Read and write, no password change
allowed. Default is 1111.
Level 2: Read and write, password changes al-
lowed. Default is 2222.
Command Buttons
OK: Sends the appropriate password level to gain
access to the controller.
Cancel: Returns user to the SLIMcom main win-
dow. Any changes to the displayed information
are lost.
Commands Menu
The Commands menu provides three commands
(Setpoints, Voltage Bias, and Selections) and
one submenu (Erase Control) to allow the user
select the necessary control functions. Please
note that Voltage Bias is currently unavailable
and will appear greyed-out in display.
Setpoints Command
Selection of the Setpoints command displays a
Setpoints dialog box (see Figure 7-10) from which
the individual control functions can be selected.