Beckoff CX9020 страница 41 Скачать руководство пользователя

Страница: 41 / 71

Configuration

CX9020

Version: 2.0

7.3.3

Adding an Embedded PC

With this step you can add an Embedded PC in TwinCAT and then configure it.

Prerequisites for this step:

• A scanned and selected target device.

Add the Embedded PC as follows:

1. Start TwinCAT and open an empty project.

2. In the tree view on the left, right-click on

I/O Devices

3. In the context menu click on

Scan

4. Select the devices you want to use and confirm the selection with

Only devices that are actual available are offered for selection.

For Embedded PCs with connected Bus Terminals (K-bus) a Bus Coupler device (CX-BK) is displayed.
For EtherCAT Terminals (E-bus) the EtherCAT coupler is added automatically.

5. Confirm the request with

Yes

, in order to look for boxes.

6. Confirm the request whether to enable FreeRun with

Yes

The Embedded PC was successfully added in TwinCAT and is displayed in the tree view with the inputs
and outputs.
The

Tree view [

}

38]

chapter illustrates how Embedded PCs with connected Bus or EtherCAT Terminals

are displayed.

Содержание CX9020








































































Результаты поиска

Содержание CX9020

Отзывы:

Похожие инструкции для CX9020

Бренды по названию

Популярные бренды

Beckoff CX9020, Руководство пользователя

Результаты поиска

Содержание CX9020

Отзывы:

Похожие инструкции для CX9020

Бренды по названию

Популярные бренды