Beckhoff TwinCAT 2 TX1200, Руководство пользователя

Страница: 25 / 80

Programming
TX1200 25 Version: 1.1
Function blocks Description
MP_EnergyValveV4_Process [ } 34]
This function block is suitable for Energy Valve actuators EV..R2+...
(V4).
MP_EPIV [
}
36]
This function block is used to control a pressure-independent control
ball valve.
MP_EPIV_R6 [
}
38]
This function block is used to control a control ball valve of series
EP..R-R6+BAC.
MP_EPIV_R6_Parameter [
}
39]
This function block is used to parameterize actuators of series EP..R-
R6+BAC.
MP_EV [
}
41]
This function block is used to control a control ball valve of series
P6...W..EV-BAC.
MP_EV_Parameter [
}
43]
This function block is used to parameterize actuators.
MP_MPX [
}
44]
For BELIMO room sensor MS24A-R..-MPX.
MP_PTH [ } 45]
This function block is used to control and monitor a PTH sensor.
MP_RoomSensor [
}
47]
This function block is used to read room sensors.
MP_RoomSensor_Parameter [ } 48]
This function block is used for the parameterization of room sensors.
MP_Smoker [
}
49]
This function block is used to control and monitor a fire damper.
MP_TEM_Configuration [
}
51]
This function block is used to configure the Thermal Energy Meter
type 22PE-.. and 22PEM-.. .
MP_TEM_Process [
}
52]
This function block is suitable for the Thermal Energy Meter Type
22PE-.. and 22PEM-... .
MP_UST_3 [
}
53]
This function block is used to control and monitor a multi-I/O module
UST3.
MP_VAV [
}
56]
This function block is used to control and monitor a volume flow
controller.
MP_VRU_Configuration [
}
58]
This function block is used to configure the VAV actuators VRU-D3-
BAC, VRU-M1-BAC and VRU-M1R-BAC.
MP_VRU_Process [ } 59]
This function block is suitable for VAV actuators VRU-D3-BAC, VRU-
M1-BAC and VRU-M1R-BAC.
MP_Window [ } 61]
This function block is used to control and monitor a window ventilation
system (FLS).
MPL_DamperLinearActuator [ } 62]
This function block is used to control and monitor an actuator of a
damper and of a globe valve.
6.2.1 KL6771
This function block takes care of communication with the KL6771 MP-Bus master terminal . The KL6771 is
configured with this function block, and data exchange with the MP network is started.
Restrictions:
• This function block must only be called once for each KL6771!
• It must be called in the same task as the actuator function blocks!
• In the PLC project this function block may only be called once per cycle!