Beckhoff TwinCAT 2 TX1200, Руководство пользователя

Страница: 34 / 80

Programming
TX1200 34 Version: 1.1
6.2.6 MP_EnergyValveV4_Process
This function block is suitable for Energy Valve actuators EV..R2+... (V4). For more information please visit
www.belimo.ch .
MP_Address is used to specify the MP-Bus device with which the function block is to communicate. bStart
activates communication with the MP-Bus device. bBusy indicates that the function block is active. If bStart
remains TRUE, the device is addressed cyclically with a period specified by the time in TMPolling . The time
should be set longer than 1 s. bError is used to indicate an error in communication with the actuator. The
type of the error can be read with iErrorId .
VAR_INPUT
MP_Address : USINT := 1;
bStart : BOOL;
strDataKL6771 : DataKL6771;
TMpolling : TIME:= t#10s;
rSetpoint : LREAL;
nOverrideControl : E_MP_EV_V4_OverrideControl;
nCommand : E_MP_EV_V4_Command;
nDataRead : WORD := 16#FFFF;
MP_Address: MP-Bus address of the slave.
bStart: a positive edge starts the function block. If this remains continuously TRUE, the function block will be
activated cyclically with a period specified by the time in TMPolling .
strDataKL6771: the data structure with which the KL6771 [
}
25] function block must be linked (see
DataKL6771 [
}
72] ).
TMpolling: the time for which the function block should address the actuator. Default 10 s, minimum time
1 s.
rSetpoint: setpoint in % (0...100).
nOverrideControl: override the setpoint with defined values (see E_MP_EV_V4_OverrideControl [
}
66] ).
nCommand: command for service and test functions of the actuator (see E_MP_EV_V4_Command [ } 66] ).