manualshive.com logo in svg

Beckhoff TF6120, Руководство пользователя

Поделиться
Скачать
Beckhoff TF6120 Скачать руководство пользователя страница 21

Installation

TF6120

21

Version: 1.1

or

http://localhost/tcopcxmlda/tcopcxmlda.dll

The TcOpcXmlDa server will reply with a status page containing the product version :

Please note:

In case of problems (like receiving no HTML status data) please check if a proxy server is activated on your
host PC. After deactivating the proxy and reloading the URL the Opc XML DA server should reply with status
info.

3.5

Setup OPC XML-DA on Windows 7

All necessary files for OPC XML-DA will be automatically installed by the setup routine. This chapter
describes the required IIS (Internet Information Services) configuration for OPC XML DA on Windows 7.

Please note: 

 The configuration may be different in other Windows Operating Systems, for example

Windows XP [

}

 17]

.

Step 1: Installing IIS on Windows 7

By default, IIS is not part of the Windows 7 installation. Therefore you need to add this functionality manually.
For more information see 

 http://technet.microsoft.com/de-de/library/cc725762%28v=ws.10%29.aspx

.

Please note:

 When installing IIS, the following extensions need to be activated:

• ISAPI Extensions

• ISAPI Filters

Содержание TF6120













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды