manualshive.com logo in svg

Beckhoff TF6120, Руководство пользователя

Поделиться
Скачать
Beckhoff TF6120 Скачать руководство пользователя страница 17

Installation

TF6120

17

Version: 1.1

12. To import the license file and activate the license, click 

License Response File...

 in the 

Order

Information

 tab.

13. Select the License Response File in your file directory and confirm the dialog.

ð

The License Response File is imported and the license it contains is activated. 
Existing demo licenses will be removed.

14. Restart the TwinCAT system.

ð

The license becomes active when TwinCAT is restarted. The product can be used as a full version.
During the TwinCAT restart the license file is automatically copied to the directory ...

\TwinCAT\3.1\Target\License

 on the respective target system.

3.4

Setup OPC XML-DA on Windows XP

All necessary files for OPC XML-DA will be automatically installed by the setup routine. This chapter
describes the required IIS (Internet Information Services) configuration for OPC XML DA on Windows XP

Please note: 

 The configuration may be different in other Windows Operating Systems, for example

Windows 7 [

}

 21]

.

Step 1: Create "Virtual Directory" in IIS (Internet Information Service)

• Open "Internet Information Services" (under "Control Panel/Administrative Tools/").

• Right click on "Default Web Site"

• Select "New" and "Virtual Directory..."

Содержание TF6120













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды