Beckhoff PS2001-4810-0000, Документация

Страница: 23 / 40

Technical data, mounting, wiring
PS2001-4810-0000 23 Version: 1.0
3.13 EMC
The EMC behavior of the device is designed for applications in industrial environments as well as residential,
commercial or small business environments.
The device was tested according to EN 61000-6-1, EN 61000-6-2, EN 61000-6-3 and EN 61000-6-4.
Without additional measures to reduce emissions at the output (e.g. by using a filter), the device is not
suitable for supplying a local DC power network in residential, commercial or small business environments.
There are no restrictions for local DC power networks in industrial environments.
EMC interference immunity
Strong transients VDE 0160 Over the entire load
range
750V, 0.3ms
EMC interference emission
Cable-related interference emission, input
lines EN 55011, EN 55022, FCC Part 15,
CISPR 11, CISPR 22 Class B
Interference emission EN 55011, EN 55022 Class B
Harmonic input current EN 61000-3-2 Class A requirements met
Class C met between 4A and 12A load
Voltage fluctuations, flicker EN 61000-3-3 Requirements met
1)
This device complies with FCC Part 15.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must be
able to deal with any interference received, including interference that may cause undesired operation.
1)
Tested with constant current loads, non-pulsating
Switching frequencies
PFC converter 100kHz fixed frequency
Main converter 80kHz to 140kHz Output load dependent
Auxiliary converter 60kHz fixed frequency