Technical data, mounting, wiring
PS2001-4810-0000
22
Version: 1.0
3.12
Front side and operating elements
Fig. 13: Front PS2001-4810-0000
Input terminals (screw terminals)
Designation (A)
Description
N
Mains input N
L
Mains input L
PE input (protective conductor)
Output terminals (screw terminals)
Designation (B)
Description
+
two identical positive poles, positive output
-
three identical negative poles, negative output
Potentiometer for the output voltage
Designation (C)
Description
Potentiometer cover
Open the flap to adjust the output voltage. Factory setting: 48 V
DC-OK LED
Designation (D)
Description
LED green
Lights when the output voltage has reached 90% of the set output voltage.
DC-OK relay contact
Designation (E)
Description
Push-in terminals
13 / 14
Monitors the output voltage of the active power supply.
See
for further information.
"Parallel Use" "Single Use" connection
Designation (F)
Description
Push-in terminals
"Link for parallel use"
Connect the two terminals when power supplies are connected in parallel. In order to achieve a distri-
bution of the load current to the individual power supplies, the output voltage is regulated in parallel
connection mode such that the voltage at no load is approx. 4% higher than at nominal load. See
chapter on
Parallel connection for power increase [
.
Содержание PS2001-4810-0000
Страница 1: ...Documentation EN PS2001 4810 0000 Power supply 48 V DC 10 A 1 phase 2020 10 08 Version 1 0...
Страница 2: ......
Страница 4: ...Table of contents PS2001 4810 0000 4 Version 1 0...
Страница 39: ......