Beckhoff KL3361, Документация

Страница: 39 / 70

Configuration software KS2000
KL3361 and KL3362 39 Version: 2.2.0
4.4.4 Process data for KL3362
In the Process data tab, you can specify which data are displayed in the process image of the KL3362
oscilloscope terminal.
Fig. 23: Process data for KL3362
Output process image
• Data word 0
For trigger unit 1, select which trigger parameter you wish to specify with data word 0 ( DataOUT0,
channel 1 [ } 51] ) of the KL3362 (see Output process data in detail [ } 44] ).
• Data word 1
For trigger unit 2, select which trigger parameter you wish to specify with data word 1 ( DataOUT1,
channel 1 [
}
51] ) of the KL3362 (see Output process data in detail [
}
44] ).
• Data word 2
For trigger unit 3, select which trigger parameter you wish to specify with data word 2 ( DataOUT0,
channel 2 [ } 51] ) of the KL3362 (see Output process data in detail [ } 44] ).
• Data word 3
For trigger unit 4, select which trigger parameter you wish to specify with data word 3 ( DataOUT1,
channel 2 [
}
51] ) of the KL3362 (see Output process data in detail [
}
44] ).
Input process image
• Data word 0
Here you can specify which input value is transferred with data word 0 ( DataIN0, channel 1 [
}
51] )
from the KL3362 to the controller (see Input process data in detail [
}
46] ).
• Data word 1
Here you can specify which input value is transferred with data word 1 ( DataIN1, channel 1 [ } 51] )
from the KL3362 to the controller (see Input process data in detail [ } 46] ).