Beckhoff KL26 Series. KS26 Series, Документация

Страница: 16 / 47

Product overview
KL26xx/KS26xx 16 Version: 2.5.0
2.2.1 Technical data
Technical data KL2612, KS2612
Number of outputs 2 x change-over
Contact material Gold-plated silver alloy
Nominal voltage 125 V
AC
/ 30 V
DC
Load type ohmic
Max. output current 2 A per channel
Maximum switching capacity
with ohmic load Alternating voltage: 0.5 A / 125 V
AC
Direct voltage: 2 A / 30 V
DC
Minimum permitted load (guide value) 10 µA at 10 mV
Response times with nominal load Max. response time 4 ms
Max. release time 4 ms
Max. bounce time 4 ms
Lamp load, control gear Max. input inrush current 2 A
Electrical isolation 500 V (K-bus / field voltage)
K-Bus current consumption 60 mA
Bit width in process image 2 outputs
Switching cycles mech. (min.) 1 x 10
8
switching operations
Switching cycles electr. (min.) 10
5
switching operations, ohmic load
at 30 V
DC
, 2 A
or 125 V
AC
, 0.5 A
Permitted switching frequency at maximum
contact load 20 switching operations/min
Contact resistance max. (new) < 40 mOhm
Insulation resistance (min.) 100 MOhm at 500 V
DC
Test voltage between open contacts 750 V (1 min. between open contacts)
Configuration no address or configuration settings required
Special features Signal relay
Weight approx. 80 g
Dimensions (W x H x D) 15 mm x 100 mm x 70 mm (width aligned 12 mm)
Mounting [ } 25]
on 35 mm mounting rail conforms to EN 60715
Permissible ambient temperature during
operation 0 °C ... +55 °C
Permissible ambient temperature during
storage -25 °C ... +85 °C
Permissible relative humidity 95 %, no condensation
Vibration / shock resistance conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity / emission conforms to EN 61000-6-2 / EN 61000-6-4
Installation position variable
Protection class IP20
Approvals/markings
CE, UKCA, cULus, EAC, GL, ATEX [ } 38]
Ex marking
Standard Marking
ATEX II 3 G Ex nA IIC T4 Gc