Beckhoff EP6224, Документация

Страница: 39 / 57

Commissioning and configuration
EP6224 and EP6228 39 Version: 1.5
5.2.4 Parameterizing a port
ü
Requirement: A device is assigned to the port. Assigning devices to ports [
}
38] .
1. In the "Ports" field, right-click on the port
2. Click on "Settings"
ð The "Settings" tab opens
5.2.5 Parameterizing a device
ü
Requirement: The device is assigned to a port. Assigning devices to ports [
}
38] .
1. In the "Ports" field, right-click on the device
2. Click on "Parameters"
ð
The "Parameters" tab opens
Buttons
• „Read“
Read the parameter values from the device.
• „Write“
Write the parameter values to the device.
• „Set default“
Set the parameter values to the default values. The default values are adopted from the device
description file. Die Standardwerte werden aus der Gerätebeschreibung im Device-Katalog
übernommen.
• „Store“
Store the current parameter values in the Parameter Server. „Data Storage“ [ } 21] .
5.2.6 Configuring a port as a digital input/output
IO-Link ports can also be configured as digital inputs or digital outputs. This allows digital sensors and
actuators having no IO-Link functionality to be connected to IO-Link ports.
1. Expand the "Std-I/O" tree node in the "Catalog" field
ð
The operating modes "dig in" and "dig out" appear
2. Configure the desired port. There are two ways to do this:
1. Drag-and-drop: pull "dig in" or "dig out" onto the port in the "Ports" field
2. Right-click on "dig in" or "dig out" and click on "Add to Port
n “
5.2.7 Activating the configuration
Changes in the IO-Link configuration tool only become effective when you activate the IO-Link configuration.
There are two ways to activate the IO-Link configuration:
• Click on the "Reload Devices" button
• Activate the TwinCAT configuration:
Click on the "Activate Configuration" button