manualshive.com logo in svg

Beckhoff EJ40 Series, Документация

Поделиться
Скачать
Beckhoff EJ40 Series Скачать руководство пользователя страница 51

Appendix

EJ40xx

51

Version: 1.2

7

Appendix

7.1

EtherCAT AL Status Codes

For detailed information please refer to the 

EtherCAT system description

.

7.2

EJ40xx - Firmware compatibility

Beckhoff EtherCAT devices are delivered with the latest available firmware version. Compatibility of firmware
and hardware is mandatory; not every combination ensures compatibility. The overview below shows the
hardware versions on which a firmware can be operated.

Note

• It is recommended to use the newest possible firmware for the respective hardware

• Beckhoff is not under any obligation to provide customers with free firmware updates for delivered

products.

NOTE

Risk of damage to the device!

Pay attention to the instructions for firmware updates on the 

separate page [

}

 52]

.

If a device is placed in BOOTSTRAP mode for a firmware update, it does not check when downloading
whether the new firmware is suitable.
This can result in damage to the device! Therefore, always make sure that the firmware is suitable for the
hardware version!

EJ4002

Hardware (HW)

Firmware (FW)

Revision no.

Release date

00 - 04*

01

EJ4002-0000-0017

2013/08

02*

EJ4002-0000-0018

2014/06

EJ4004

Hardware (HW)

Firmware (FW)

Revision no.

Release date

00 - 01*

04*

EJ4004-0000-0020

2020/01

EJ4008

Hardware (HW)

Firmware (FW)

Revision no.

Release date

00 - 01*

04*

EJ4008-0000-0020

2019/06

EJ4018

Hardware (HW)

Firmware (FW)

Revision no.

Release date

00 - 01

01

EJ4018-0000-0016

2016/07

01 - 03*

02

2016/12

03*

2017/07

EJ4024

Hardware (HW)

Firmware (FW)

Revision no.

Release date

00 - 01*

04*

EJ4024-0000-0020

2019/04

*) This is the current compatible firmware/hardware version at the time of the preparing this documentation.
Check on the Beckhoff website whether more up-to-date 

documentation

 is available.

Содержание EJ40 Series


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды