Product
Overview
Embedded PC
17
System interfaces
Technical Data
Unlike other CX components, the system interfaces cannot be upgraded or expanded in the field. They are supplied
ex factory in the specified configuration and cannot be separated from the CPU module. The system interfaces run
through the internal PC104, so that further CX components can be connected. The power supply of the system
interface modules is ensured via the internal PC104 bus.
Technical
data
CX1000-N001
CX1000-N002
CX1000-N003
CX1000-N005*
Interfaces
1 x DVI +
2 x USB 1.1
1 x COM2 +
1 x COM3
Line IN,
Line Mic IN,
Line OUT
1 x COM2 +
1 x COM3
Connection
type
DVI-I 29-pin socket
+ 2 USB ports type
A
2 x 9-pin D-Sub
3.5 mm socket
for jack plug
2 x 9-pin D-Sub
Properties
DVI-I interface also
carries out VGA
signals (DVI-A)
max. Baud rate 115 kBaud on
both interfaces COM1: RXD,
TXD, DTR COM2: RXD, TXD
built-in PC
Beeper
Line OUT
output, max.
200 mW,
suitable for
earphones
max. Baud rate 115
kBaud on both
interfaces
2 x RS485/422,
optically isolated
Power
supply
via system bus (through CX1100 power supply module)
Dimensions
19 mm x 100 mm x 91 mm
Weight
approx.
80 g
* can only be used instead of and not at the same time as CX1000-N002
