Beckhoff CP32 -2 -0020 Series, Руководство пользователя

Страница: 16 / 45

Commissioning
CP32xx-2xxx-0020 16 Version: 1.1
4.2 Mounting
The CP32xx Panel PC is designed for mounting on the mounting arm. Please observe the environmental
conditions prescribed for the operation (see Chapter 8
Technical data [ } 39] ).
To align the device according to your requirements, four different mounting arms are available on which you
can mount the device. The device is mounted on the mounting arm via a mounting arm adapter.
Figure 7 shows the four available mounting arms for mounting on the ceiling (1), on the control cabinet (2),
on the floor (3) and on the wall (4).
1 2 4
3
Fig. 7: CP32xx_mounting arms
You can select from the following ordering options:
Table 8: Mounting arm ordering options
Order identifier Execution
C9900-M802 Mounting arm for mounting on ceiling
C9900-M803 Stand for mounting on the control cabinet
C9900-M804 Stand for mounting on hall floors
C9900-M805 Bracket for mounting on the wall
Depending on the chosen mounting arm, the procedure for mounting is different. Chapter 4.2.2 Mounting
arm installation [ } 19] shows the two different procedures.
The C9900-M803 and M804 mounting arms are equipped with a cable set for the CP32xx-2xxx-0020 or the
C9900-M800 key extension. These cables are connected to a Harting HAN connection socket in the lower
part of the mounting arms. Figure 7 shows the connection sockets on the two mounting arms mentioned (2,
3). Both mounting arms are supplied with a plug to match the connection socket. Further information on the
Harting HAN plug can be found in the corresponding plug documentation.
Mounting arm adapter