Beckhoff CP29 Series, Руководство пользователя

Страница: 18 / 45

Product overview
CP29xx 18 Version: 3.1
3.3.3 CP-Link 4
The CP29xx-0010 Control Panel has a CP-Link 4 input (X104) in the form of an RJ45 socket. This is not an
Ethernet port. Via the interface the Control Panel can be connected to an Industrial PC over a distance of up
to 100 m. The connection can be made either directly with an Industrial PC with a corresponding PCIe
module or indirectly via an intermediate transmitter box.
8 1
X104
Fig. 10: CP29xx-0010_CP-Link 4 interface pin numbering
Table 9: CP-Link 4 pin assignment
Pin Signal Description
1 0 + Pair 0
2 0 -
3 1 + Pair 1
4 2 + Pair 2
5 2 -
6 1 - Pair 1
7 3 + Pair 3
8 3 -
On an Industrial PC with PCIe module, CP-Link 4 is available as a two-cable display link. The Control Panel
can be connected directly to the Industrial PC via the module. USB 2.0 (100 MBit/s) and DVI are transmitted
together via a CP-Link 4 cable. An additional power supply is required for the CP29xx-0010 (see Fig. 11).
24 V 24 V
CAT.6
A
(100 m)
C6032 mit CP-Link 4 Modul
CP29xx-0010
CP39xx-0010
CP-Link 4 (100 m)
Fig. 11: CP29xx-0010_CP-Link 4
CP-Link 4 with transmitter box
If the Industrial PC is not equipped with a PCIe module, a transmitter box is required for connecting a
CP29xx-0010. The transmitter boxes CU8802 (two-cable display link) and CU8803 (One Cable Display Link)
are available for this purpose.
With the CU8802, the Industrial PC is connected to the transmitter box via USB and DP/DVI. The transmitter
box is then connected to the Control Panel via the CP-Link 4 connection of the transmitter box using a CP-
Link 4 cable. USB and DVI are transmitted together via this cable. An additional power supply is required for
the CP29xx-0010 (Two Cable Display Link). Fig. 12 shows the wiring with the CU8802.