Beckhoff CP29-2-0000 Series, Руководство пользователя

Страница: 12 / 37

Product overview
CP29xx-2xxx-0000 12 Version: 1.3
3.2.2 USB
The Control Panel has a USB 3.0 interface (X104) that supports the USB 3.0 specification. The Control
Panel is connected to the Industrial PC via the USB input.
1 2
3 4
X104
Fig. 3: CP29xx-2xxx_USB interface pin numbering
Table 3: USB interface pin assignment
Pin Assignment
Shield GND
1 Vbus
2 D -
3 D +
4 GND
5 StdA_SSRX -
6 Std
7 GND_DRAIN
8 StdA_SSTX -
9 Std
3.2.3 DVI
The Control Panel has a DVI interface (X106). It is used to transmit the video signal from the Industrial PC to
the Control Panel.
The graphics signal is transmitted directly over a maximum distance of 5 m. The Industrial PC requires a
conventional DVI output. The resolution at the Control Panel depends on the distance from the display
device.
1
9
17
8
16
24
X106
Fig. 4: CP29xx_DVI interface pin numbering
Table 4: DVI interface pin numbering
Pin Signal Pin Signal Pin Signal
1 Rx2- 9 Rx1- 17 Rx0-
2 Rx2+ 10 Rx1+ 18 Rx0+
3 GND 11 GND 19 GND
4 Rx4- 12 Rx3- 20 Rx5-
5 Rx4+ 13 Rx3+ 21 Rx5+
6 DDC CLK 14 + 5V DVI 22 GND
7 DDC DAT 15 GND 23 RxC+
8 AV SYNC 16 HPD 24 RxC-