Basic information
11
BK 7000
Electrical data
The electrical data specific to the fieldbus is given in this chapter. The fol-
lowing table lists an overview of all data:
Technical data
BK7000
Voltage supply
24 V DC (20 V...29 V DC)
Input current
70 mA + (total K-Bus current)/4
500 mA max.
Starting current
2.5 x continuos current
Output current K bus
1750 mA max.
Configuration possibility
by KS2000 or the controller
Number of bus terminals
64
Digital peripheral signals
256 inputs/outputs
Analog peripheral signals
256 inputs/outputs
Peripheral bytes
512 bytes I and 512 bytes O
Bus connection
Two BNC-connectors (ControlNet A and B) and 1 NAP-Port
Baud rates
5 MBaud (ControlNet V1.5)
Voltage power contact
24V DC / AC max.
Current load power con.
10 A max.
Max. voltage capacity
500 Veff (power contact / supply voltage/field bus)
Weight approx.
170g
Operating temperature
0°C ... +55°C
Storage temperature
-20°C ... +85°C
Relative humidity
95% non-condensing
Vibration /shock resistance
conforms to IEC 68-2-6 / IEC 68-2-27
EMC resistance burst / ESD
conforms to EN 50082 (ESD,Burst) / EN50081
Orientation for mounting
Any
Type of fuse
IP20
Current consumption on the
K-Bus
For operation of the K-bus electronics, the bus terminals require energy
from the K-bus that is supplied by the bus coupler. Refer to the catalog or
the corresponding data sheets of the bus terminals for details of the K-bus
current consumption. In doing so, pay attention to the maximum output
current of the bus coupler that is available for powering the bus terminals.
Using a special power supply terminal (KL9400), power can be fed back
into the K-bus at any chosen point. If you wish to use a power supply ter-
minal, please contact Beckhoff’s technical support. .
