Beckhoff C6640, Инструкция по установке и эксплуатации

Страница: 7 / 30

General instructions
Operator's obligation to exercise diligence
The operator must ensure that
•
the Industrial PC is only used for its intended use (see also
Product Description ).
•
the Industrial PC is in a sound condition and in working order
during operation.
•
the operation manual is in good condition and complete, and
always available for reference at the location of the Industrial PC.
•
the Industrial PC is operated, maintained and repaired only by
sufficiently qualified and authorised personnel.
•
the personnel is instructed regularly about relevant occupational
safety and environmental protection aspects, and is familiar with
the operating manual and in particular the safety notes contained
herein.
•
none of the safety and warning notes attached to the Industrial PC
are removed, and that all notes remain legible.
National regulations
depending on the machine
type Depending on the type of machine and plant in which the Industrial PC is
being used, there will be national regulations for the control of such
machines and plant that the operator must observe. These regulations
cover, amongst other things, the intervals between inspections of the
controller.
The operator must initiate such inspections in good time.
Warning
Only trained persons may open the Industrial PC housing!
The operator is responsible for ensuring that only trained electrical staff
opens the housing of the Industrial PC.
Procedure in the event of a
fault In the event of a fault in the Industrial PC, appropriate measures can be
determined with the aid of the list in the
Fault correction section.
Operator requirements
Read the operating
instructions Every user of the Industrial PC must have read these operating
instructions.
Software knowledge
Every user must be familiar with any of the functions of the software
installed on the PC that he can reach.
C6640, C6650 5