Beckhoff BC8050, Документация

Страница: 33 / 93

Parameterization and Commissioning
BC8050 und BC8150 33 Version: 3.0.0
Fig. 29: Data memory mapping
Used code and data memory
Fig. Code and data memory (1) "Used PLC code" in %.
Fig. Code and data memory (2) "Used PLC data" in %.
Fig. Code and data memory (3) "Used PLC source" in %.
Fig. 30: Code and data memory
Other memory
Fig. Other Memory (1) "Used Near Heap" is required for the COM interface and SSB. % values.
Fig. Other Memory (2) "Used Huge Heap" is required for the ADS communication. % values. This value
should be less than 30 %.
Fig.
Other Memory (3) "Used File Area" is required for the TwinCAT configuration, the TSM file and the
16 kbyte flash access. % values.