Beckhoff AMP8000, Руководство по эксплуатации, Страница: 13 / 109

For your safety
Version: 1.1
───
13 AMP8000 and AMP8500
Read the general safety instructions in this chapter. Observe the
warnings in these operating instructions for your own safety, the
safety of others and the safety of the product.
When working with control and automation products, many dangers
can result from careless or incorrect use. Work particularly thor-
oughly, not under time pressure and responsibly towards other peo-
ple.
2.1
Safety pictograms
On Beckhoff products you will find attached or lasered safety pic-
tograms, which vary depending on the product. They serve to pro-
tect people and to prevent damage to the products. Safety pic-
tograms must not be removed and must be legible for the user.
2.1.1
Power supply module
2.1.1
Warning of high voltage!
The DC link on the modules can carry a life-threatening voltage of
over 848 V
DC
.
Warning of a hot surface
During and after operation there is a risk of burns at the power sup-
ply module due to hot surfaces over 60 °C. Allow the housing of the
power supply module to cool down for at least 15 minutes.