Beckhoff AM8100 Series, Руководство по эксплуатации

Страница: 15 / 50

Technical description
AM8100 15 Version: 2.2
Installation altitude
f
H
= Altitude utilisation factor
h = Altitude in metres
Calculation of the power data when exceeding the
specified installation altitude > 1000 m up to 3000 m:
M
0_red
= M
0
x f
H
Ambient temperature and installation altitude
Calculation of the power data when exceeding the specified limits:
Ambient temperature > 40 °C and installation altitude > 1000 m
M
0_red
= M
0
x f
T
x f
H
6.3 Standard features
6.3.1 Style
The basic style for the AM8100 synchronous servomotors is IM B5 according to DIN EN 60034-7.
The permitted mounting positions are specified in the technical data.
NOTE
Motor damage
To avoid liquid entry damaging the motor, fluids (i.e. used for cleaning purposes) must be removed from
shaft when motor is mounted according to IM V3.
6.3.2 Shaft end, A-side
The force transfer is friction-locked (backlash-free), via a clutch, via the cylindrical shaft end A, or optionally
as a form-locking connection via a feather key groove according to DIN 6885. The bearings are designed for
a service life of 30,000 hours.
Radial force
If the motors drive via pinions or toothed belts, then high radial forces will occur. Refer to the technical data
for the permissible values at the shaft end, depending on the speed of rotation. Please use the program on
our homepage for calculating the exact forces (
www.beckhoff.com ).
Axial force
Axial forces arise when assembling pinions or pulleys on the shaft and using right-angle gear units, for
example. Please use the program on our homepage for calculating the exact forces (
www.beckhoff.com ).