12
Instruction Manual –
Model AF Oil Burner
Beckett
Service & maintain burner
Owner service and maintenance
Properly installed and maintained, your
AF
burner will provide years of
efficient, trouble-free operation. Please take care of your equipment by
following the warnings provided and by doing the following (notify your
qualified service agency if you find anything wrong):
Regular Service
•
Have your burner/heating appliance serviced annually by your qualified
service agency, unless an extended service interval has been
determined as follows.
•
With properly configured burners, there are special Clearburn® practices
(such as low sulfur fuels, fuel additive programs, outside combustion air,
high effectiveness filtration, etc.) that can extend service intervals.
Discuss this with your qualified service agency to determine the proper
regular service interval for your heating system.
Daily
Check the room in which your burner/appliance is installed. Make sure:
•
air ventilation openings are clean and unobstructed
•
nothing is blocking the burner inlet air openings
•
no combustible materials are stored near the heating appliance
•
there are no signs of oil or water leakage around the burner or
appliance
Weekly
•
Check your oil tank level. Always keep your oil tank full, especially during
the summer, in order to prevent condensation of moisture on the inside
surface of the tank.
Warranty
Beckett warrants its equipment specifically to those who have purchased it for
resale, including your qualified service agency (dealer). In the event of any
problems with your equipment or its installation, you should contact your
dealer for assistance.
The Oilheat Manufacturers' Association supports the use of low sulfur fuels as defined by ASTM D396, Grades No. 1 Low Sulfur and No. 2 Low Sulfur, as
the preferred heating fuel for the following reasons:
•
Low sulfur fuels reduce deposits on heat exchanger surfaces, extending the service interval between cleanings.
•
The reduced deposits increase the efficiency of the appliance.
•
Low sulfur fuels reduce particulate emissions.
•
Low sulfur fuels reduce oxides of nitrogen emissions.
___________________________________________________________________
R.W.
BECKETT
CORPORATION
U.S.A.: P.O. Box 1289
•
Elyria, Ohio 44036
Canada: R.W. Beckett Canada, Ltd.
•
Unit #3, 430 Laird Road
•
Guelph, Ontario N1G 3X7
Form Number 6104BAF R0803
Printed in U.S.A. © 2003 R.W. Beckett Corporation
Bar code
