Operation:
One of the most important steps in this process is enabling the
AUX function within the radio menu. Most Becker radios are pre-
programmed to recognize a CD Changer connection and because
of that you must perform the following steps and change the
setting to “AUX” otherwise the radio will not recognize the
adapter.
Enabling the AUX function
Radios with TP button: (i.e. CDR-220)
1.
Turn radio "ON"
2.
Press and hold the "TP" button for about 8 seconds until
Becker 1 is displayed.
3.
Turn the Tuning Knob until AUX OFF is displayed.
4.
Press either button located directly under the Arrows on
the display to change the present setting from OFF to ON.
Turn radio OFF.
5.
Turn Radio back “ON” Press “CD” button to enter AUX
Mode. This is the mode to use whenever you want to
listen to the device connected to the adapter.
Radios with
☼
button: (i.e. BE6104)
1.
Turn Radio “ON”
2.
Press and hold the
☼
button for about 8 seconds.
3.
Select AUX “ON/OFF” option.
4.
Press either button located directly under the Arrows on
the display to change the setting to ON.
5.
Turn radio OFF.
6.
Turn Radio back ON press the “
☼
” button until “AUX” is
displayed.
Other Radios with
☼
button (i.e. BE4602)
1.
Turn radio ON.
2.
Press and hold the
☼
button for 8 seconds, until Becker 1
is displayed.
3.
Turn the Tuning Knob until AUX OFF is displayed.
4.
Press either button located directly under the Arrows on
the display to change the present setting from OFF to ON
5.
Turn Radio back “ON” Press “CD” button to enter AUX
Mode
