A.
Flush Mounting the USB Terminal to the Dash
1.
Drill a ¾” hole in the dash using a step drill bit or
equivalent (See
Fig. 3
)
Fig. 3
Step drill bit
2.
Insert the male end of the short USB extension cable (See
Fig. 4
) through the ¾” hole in dash and mate with the
USB Female terminal on the Adapter (See
Fig. 5
)
Fig. 4
USB dash mount extension cable
Fig. 5
USB Male (left) USB Female (Right)
3.
Push the USB flat terminal ( See
Fig. 6
) through the hole
until it snaps in place and flush with mounting surface
(See
Fig. 7
)
Fig. 6
Flat USB Terminal
Fig. 7
Flush mounted USB terminal
