Becker S80, Руководство по сборке и эксплуатации

Страница: 15 / 20

15
Indicator LED’s
Basic Control Unit S80
MLS Professional Card
LED Illustration Indication Meaning
POWER
+UB
on Power supply connected
off No power supply connected
UP
AUF
on Door moves UP
DOWN
ZU
on Door moves DOWN
LED Illustration Indication Meaning
Pilot
Betr
on Normal mode
contin. flash Setting mode (dead-man mode)
In order to switch to normal mode (automatic), please push the pro-
gramming button Prog .
Fault1
Stör1
on
STOP button pressed, wicket door switch/spring break safety device
triggered or Emergency Stop transistor faulty
1 flash Door running time exceeded
2 flashes Pre-limit switch testing set too high
3 flashes No switch pulse from the safety edge at the bottom end limit
4 flashes Limit switch Up and Down activated simultaneously.
contin. flash Internal communication fault or main processor faulty
Fault2
Stör2
on Hardware test routine being processed
1 flash Safety circuit of drive has been triggered
2 flashes Safety edge actuated just before downward movement of door or
internal bottom rail sensor faulty
3 flashes Slack rope switch/pull in cable safety/switch
4 flashes Internal communication fault or monitoring processor faulty
5 flashes
The door has run up against an obstacle 5 times because automatic
closing is activated
6 flashes The unit connected to system socket X1 is faulty
contin. flash Photoelectric barrier actuated
USA
USA
on Safety edge actuated
off Safety edge not actuated
VES
VES
on Pre-limit switch actuated
off Pre-limit switch not actuated
Sonder
Sonder
off DIP switch released/control times unchanged
1 flash DIP switch inhibited/control times unchanged
2 flashes DIP switch released/control times changed
on DIP switch inhibited/control times changed