Becker REU6100, Инструкция по установке и эксплуатации

Страница: 93 / 106

Becker Avionics
Installation
Post Installation Check
DV64460.03 Issue 11 January 2019 REU6100 93
2.19 Post Installation Check
Once the device/system is installed completely do a test procedure to make sure the system
functionality. Make sure that the compliance with the authority required procedures is obeyed.
The description that follows gives guidance for such tests.
Mechanical Installation and Wiring Check
•
Verify all cables are securely fixed and shields connected properly to ground.
•
Check the movement of all controls to verify there is no interference.
•
Verify all screws are tight, check if all connections are mechanically secured.
Power Supply
• Check the power supply lines and confirm correct polarity. Don´t apply reverse voltage!
• Confirm that the aircraft power supply is within the specified limits, with and without a
running engine.
Power On Check
•
Power-up the aircraft systems and confirm normal operation of all functions of the
REU6100.
•
For ACU610X devices refer to the operation section of the ACU610X manual for specific
operational details ( www.becker-avionics.com/downloads/ → Intercom).