Becker Centronic VarioControl VC120, Руководство по сборке и эксплуатации

Страница: 28 / 72

[ The shading solution shifts to confirm.
Æ The new transmitter is now programmed in.
Intermediate positions I + II
Note
The intermediate positions I + II are freely selectable
positions for the shading solution between the two
limit positions. Each travel button can be assigned
one intermediate position. Both limit positions must
be set before the intermediate position is set.
When both or individual limit positions are deleted,
both intermediate positions are deleted as well.
Setting the desired intermediate position
Open/close the shading solution to the desired intermediate posi‐
tion.
Press the STOP button and, within 3 seconds, also press the desired
travel button and hold the two buttons down.
[
The shading solution shifts to confirm.
Æ
The intermediate position is now saved.
Setting the desired intermediate position
Press the travel button for the desired intermediate position twice
within one second.
Æ The shading solution runs to the intermediate position assigned
to the travel button.
Deleting the desired intermediate position
Open/close the shading solution to the desired intermediate posi‐
tion.
Assembly and Operating Instructions
28