Becker Centronic TimeControl TC511A, Руководство по эксплуатации

Страница: 38 / 64

38
Operating Instructions
Note
A light sensor can be connected to the device. See operating instruc-
tions for the Centronic SensorControl SC43 .
Light sensor
Explanations
MAN/AUTO sliding switch
In the sliding switch setting, only manual command controls are carried out
(e.g.: UP, STOP, DOWN by pressing the relevant buttons).
In the sliding switch setting, automatic command controls are carried out
(e.g. shade function, twilight function, time, astro function,...)
Transmission control light
A radio signal is indicated by the transmission control light being lit.
If the battery starts running out, the transmission control light fl ashes during
transmission.
The transmitter power and/or radio range is reduced when the battery is run-
ning low. If the transmission control light is no longer lit when the pushbutton is
pressed, the batteries must be changed.
Group
Group control means controlling one or several receivers at the same time. The
programmed group is activated using a single command.
With the TC511A, the group is driven via an RF channel.
Operating mode
You will see the time and the current operating mode e.g. HOLIDAY in the dis-
play.
OK button
When the
OK
button is pressed, the currently displayed values are saved.