Explanation of functions
Roller shutter selection
With the roller shutter function, the roller shutter runs in maintained operation
mode after a travel button is pressed.
Venetian blind selection
With the venetian blind function, the venetian blind runs in touch mode to facil-
itate precise positioning of the laths. If you press a travel button for longer than
1 second, the venetian blind runs in maintained operation mode.
After moving to the programmed intermediate and end positions, the laths
automatically tilt (if the tilt position was programmed).
/ Slide switch
The / slide switch is used to switch the selected channel or group between
manual and automatic. The current setting is shown on the display.
Channel
The channel of a transmitter can be programmed into one or more receivers.
One receiver is operated through an individual command, several receivers
through a group command.
Central command
If all the channels of the transmitter are selected, it is possible to operate all of
the assigned receivers/groups simultaneously.
Channel selection button
Channel selection is only possible in Operating mode.
Up to 10 channels can be selected using the channel selection button. The in-
dividual channels are indicated by the corresponding LED lighting up.
Channel
LED colour
1-5 and central command 1-5
green
6-10 and central command 6-10
red
1-10 central command
orange
36 - en
