Becker Centronic SunWindControl SWC62, Руководство по сборке и эксплуатации

Страница: 44 / 124

Settings menu
SETTING menu
In the SETTING menu, you have the following options:
• SUN (if the sensor is connected)
•
DELAY (only when Expert mode is ON and a sensor is connected)
• SUN (if the sensor is connected)
•
DELAY (only when Expert mode is ON and a sensor is connected)
• WINTER ON/OFF
•
WIND MONITORING
• TIME END POSITION/I-INTERMEDIATE POSITION/II-INTERMEDIATE
POSITION (only if the shade time is programmed)
•
SUN END POSITION/ /I-INTERMEDIATE POSITION/II-INTERMEDIATE
POSITION (only if a sensor is connected)
• TEST MODE ON/OFF (if a sensor is connected)
• Language selection (ENGLISH)
•
SUMMER/WINTER (Automatic summer/winter time adjustment)
To carry out settings, press the OK button repeatedly until you come to the de-
sired menu item.
SUN / SUN
The threshold value is pre-set to 04 for SUN and 03 for SUN . Set to this
value – the sun protection function is off. The brightness value can be set to
anywhere between 01 (heavily overcast) and 15 (direct sunlight). The display
indicates the current sun value and the sun value to be set. The value to be set
flashes.
DELAY (only when set to EXPERT MODE ON)
The delay time is reset to 3 mins and the delay time to 15 mins.
The delay time denotes the time between a violation of the upper SUN
threshold value and the extend command.
This value can be set manually.
The delay time denotes the time between a violation of the lower SUN
threshold value and the retract command.
This value can be set manually.
44 - en