Becker BKR-HF, Руководство по установке

Страница: 4 / 12

8. Connect plug on control/mic (See Fig . 8
Fig . 8 Fig . 8
Fig . 8) to blue jack on
Bluetooth Module (See Fig. Fig. Fig. Fig. 7 77 7)
Fig. Fig. Fig. Fig. 8 88 8
Control button/Microphone
9. Consider where to install control/mic button. Keep in mind
the control button must be within reach of the driver and
facing driver for voice commands and phone dialog (cable is
6ft. long).
We recommend completing the rest of the We recommend completing the rest of the We recommend completing the rest of the We recommend completing the rest of the install install install install
prior to securing the control/mic button to the dash
prior to securing the control/mic button to the dash prior to securing the control/mic button to the dash
prior to securing the control/mic button to the dash
. . . . Once you
decide on a location simply remove tape backing from
control /mic button
Make sure no ventilation duct is pointed towards the mic.
It is best to mount button facing driver
The Bluetooth Module also has a USB Charging port. Should you
decide to use it, we suggest one of 3 connecting options:
A . Flush
Flush Flush
Flush to dash/panel
to dash/panel to dash/panel
to dash/panel requires drilling a ¾” hole in the dash
requires drilling a ¾” hole in the dash requires drilling a ¾” hole in the dash
requires drilling a ¾” hole in the dash
B . Flush Flush Flush Flush with Support with Support with Support with Support bracket bracket bracket bracket (use this option to mount USB
terminal wherever your installation demands without drilling)
C . No
No No
No USB
USB USB
USB Mount
Mount Mount
Mount---- (default)
A. A. A. A.
Flush t
Flush t Flush t
Flush to
o o
o Dash
Dash Dash
Dash or Panel
or Panel or Panel
or Panel
(drilling required) (drilling required) (drilling required) (drilling required)
1. Drill a ¾” hole in the dash or panel using a step drill bit or
equivalent (See Fig.
Fig. Fig.
Fig. 11
11 11
11)
Fig.
Fig. Fig.
Fig. 11
11 11
11
Step drill bit
2. Insert the 3ft. USB cable male terminal (See Fig. Fig. Fig. Fig. 12 12 12 12)
through the ¾” hole created in step 1 and plug into USB port
on Module (See Fig. Fig. Fig. Fig. 13 13 13 13)
Fig. Fig. Fig. Fig. 12 12 12 12
Flush mount 3 ft. USB cable