Becker B-Tronic VarioControl VC3201B, Инструкция по сборке и эксплуатации

Страница: 8 / 28

Intended use
The transmitter described in these instructions may only be used for operating suit-
able drives and control units with bidirectional KNX radio. You can operate either one
group or a number of groups of devices with this transmitter.
• Please note that radio-controlled systems may not be used in areas with a high
risk of interference (e.g. hospitals, airports).
• The remote control is intended solely for use with equipment and systems in
which malfunctions in the transmitter or receiver would not pose any risk to per-
sons, animals or property, or which contain safety devices to eliminate such
risks.
•
The operator is not protected from interference from other telecommunications
systems and terminal equipment (e.g. even from radio-controlled systems
which are properly operated in the same frequency range).
• Only connect radio receivers to devices and systems approved by the manufac-
turer.
8