Navigation CD 3.X
Subject to errors and technical modifications
16
Copyright by Becker GmbH, D-76303 Karlsbad
Destination input via coordinates
If the geographical coordinates (latitude and longitude) of a
destination are known, these can be entered and route
guidance to the destination started.
To enter the coordinates of the destination, select
!
by turning the right-hand rotary control
.
Press to confirm the selection.
Enter the latitude of the destination using the right-hand
rotary control
. Entries must be made in degrees, minutes,
seconds and a direction as the crow flies, e.g.
11°38’34
[[
N
.
To confirm the entry, press and hold the right-hand rotary
control
for more than 2 seconds. To confirm, the small
tick
can also be selected and the right-hand rotary
control
pressed briefly.
Enter the longitude of the destination using the right-hand ro-
tary control
as described above.
To confirm the entry, press and hold the right-hand rotary
control
for more than 2 seconds. To confirm, the small
tick
can also be selected and the right-hand rotary
control
pressed briefly.
Note:
If the coordinates entered are located beyond the
boundaries of the digital map, a message will
appear notifying you of this. The system cannot
navigate to a position beyond the boundaries of
the digital map.
The navigation system will now prompt you to enter a name
for the coordinates entered.
Enter a name as described in the main instructions under
"Entering a destination in the destination memory".
The program then switches to the Route menu.
Route guidance can now start.
!
&
!!"P
YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYY
YYYYYY
LONGITUDE
P
YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYY
YYYYYY
