Navigation CD 3.X
Subject to errors and technical modifications
22
Copyright by Becker GmbH, D-76303 Karlsbad
Selecting / deleting direct programming
Only applies when
TMC is switched off
.
Activate the TP menu.
Selecting:
Press the
multifunction button.
Using the right rotary control
, select the desired TP trans-
mitter. After a short delay and without actuation, the selected
transmitter is accepted.
Deleting:
Press the
multifunction button.
Using the right rotary control
, select
<;6:,3,*;
and
press to confirm. After a short delay and without actuation,
the direct programming is deleted.
Quit the TP menu.
Switching TMC on/off
Note:
You can find further information on TMC under
“Dynamic navigation with TMC” on page 18.
Activate the TP menu.
Switching on
:
Press the
multifunction button repeatedly until
!
65
is displayed.
If TMC is switched on, a traffic programme transmitter can-
not be selected freely. A TMC station is selected by the unit,
provided one can be received. This transmitter then corre-
sponds to the traffic programme transmitter.
Switching off:
Press the
multifunction button repeatedly until
!
6--
is displayed.
If TMC is switched off, a traffic programme transmitter can
be selected freely.
Note:
Dynamic navigation functions (dynamic route, traf-
fic information) cannot be selected or called up.
;(
1 1 E
$
!7
;(
#63 !4*
;(
1 1 E
<;6:,3,*;
!7
;(
#63 !4*
, +
!7 ;( #63
!4*
!4*
!4*
