Becker 4935 200 011 0, Техническая информация

Страница: 9 / 28

Intended use
This adjustment set is intended exclusively for setting and commissioning
Becker tubular drives with electronic limit switching. Please observe the As-
sembly and Operating Instructions for the respective tubular drive. After com-
missioning, the adjustment set must be removed and replaced with a perman-
ently installed operator control.
For drives with mechanical limit switching, you must only use sets without a
programming button because the limit switches in the drive can become dam-
aged or destroyed.
Safety instructions
General information
• Only use in dry rooms.
• Only use unmodified original parts from the control unit manufacturer.
•
Keep children away from control units.
• Observe all pertinent country-specific regulations.
Caution
• Risk of injury due to electric shock.
•
Connections to the 230 V mains must always be per-
formed by an authorised specialist.
•
Disconnect the connecting cable from the power supply
prior to assembly.
• Always comply with the regulations of local energy supply
companies as well as the VDE 100 provisions for wet and
damp rooms during installation.
• Never use faulty or damaged devices.
9 - en