15
EN
Steam Generator Iron | Centro de Planchado | Ferro com Caldeira
2.4. Troubleshooting
Problem
Possible causes
Solution
The iron begins
to smoke when
switched on.
During first use: certain
components on the appliance
have been lightly greased at
the factory and may produce a
small amount of smoke when
initially heated.
This is completely normal and
will stop after a short while.
The iron does
not produce any
steam.
During first use, water has not
filled the hose (4) completely.
Press and hold the steam
release button (12) until
steam comes out.
The “calc’nclean” indicator light
(1) will flash. The descaling
process has not been
completed.
Perform a cleaning cycle
(see the “Descaling process”
section).
Dirt comes out
through the
soleplate.
There is a build-up of lime scale
or minerals in the iron.
Run a cleaning cycle
(see section “Descaling
Process ”).
Chemical products or additives
have been used.
Never add products to the
water (see the “filling the
water tank” section).
Clean the soleplate with a
damp cloth.
The “calc’nclean”
indicator light
(1) does not
turn off.
The iron descaling process has
been stopped before being
completed.
Restart and complete the iron
Descaling process.
The appliance
makes a
pumping sound.
Water is being pumped into the
iron.
This is normal.
The water tank is empty.
Fill the water tank.
The iron
produces little
steam.
The iron was turned on
some time ago.
It is normal, the iron produces
steam gradually until it is
stabilized.
If the above tips do not solve the problem, get in touch with our
customer service.
AF BECKEN manual ferro_caldeira SKU7158119 BSS5261 A5 3JUL.indd 15
AF BECKEN manual ferro_caldeira SKU7158119 BSS5261 A5 3JUL.indd 15
03/07/2020 16:21
03/07/2020 16:21
