18
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt
container is filled with salt.
Note:
1. The salt container must be refilled when the salt warning light in the
control panel comes on. Though the salt container may be full, the light
indicator may not be off until the salt fully dissolves. If there is no salt
warning light in the control panel.
2. If the salt overspills, a soak programme can be run to eliminate them.
C. Fill the Rinse Aid Dispenser
Rinse Aid feature
The rinse aid is automatically added during the last rinse, ensuring a
thorough rinsing, spot and streak free drying.
Attention!
Only use branded rinse aid for dishwasher. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning agent,
liquid detergent), as this would damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse aid warning light on the control panel, you can
estimate the amount of rinse aid to be added by the colour of the
optical level indicator “D” located next to the cap. When the rinse aid
container is full, the whole indicator will be dark . As the rinse aid is
lower, the size of the dark dot decreases. You should never let the rinse
aid get below ¼ full.
