14
A. Remove the lower basket, unscrew and remove the cap from the salt
container. See fig.
1
B. If you are filling the container for the first time, fill 2/3 of its volume
with water (around 500 mL). See fig
2
C. Place the end of the funnel (supplied) into the hole and add about
2 Kg of salt. It is normal for a small amount of water to come out of
the salt container.
D. Carefully screw the cap back on.
E. Usually, the salt warning light will be off in 2-6 days after the salt
container is filled with salt.
NOTE:
1. The salt container must be refilled when the salt warning light in the
control panel goes on. Though the salt container is filled enough, the
indicator light may not go off before the salt is fully dissolved. If there
is no salt warning light in the control panel (for some models), you
can judge when to load the salt into the softener by the cycles that
the dishwasher had run.
2. If there are spills of salt, a soak programme could be run to wipe
them out.
Filling the Rinse Aid Dispenser
Rinse aid is automatically added during the last rinse, ensuring
thorough rinsing, spot and streak-free drying.
Attention!
Only use branded rinse aid for dishwashers. Never fill the rinse aid
dispenser with any other substances (e.g. dishwasher cleaning agent,
liquid detergent), as this would damage the appliance.
AF MANUAL MÁQ. LOIÇA ENCASTRE BBIDW5370 A5 (2).indd 14
AF MANUAL MÁQ. LOIÇA ENCASTRE BBIDW5370 A5 (2).indd 14
08/09/2020 12:09
08/09/2020 12:09
