Device Configuration
Interface Setup –
Internet (4G/LTE)
51
BEC 6900 R21 / RidgeWave 6900 User Manual
Username/Password:
Enter the username and password provided by your service provider. The
username and password are case sensitive.
PIN:
PIN stands for Personal Identification Number. A PIN code is a numeric value used in certain
systems as a password to gain access and authenticate. In mobile phones a PIN code locks the SIM
card until you enter the correct code. If you enter the PIN code incorrectly into the phone 3 times in a
row, then the SIM card will be blocked, and you will require a PUK code from your network/service
provider.
Connection
Connection:
Default set to Always on to keep an always-on 4G/LTE connection.
Keep Alive:
Select
Yes
to ensure the 4G/LTE internet connection is always available.
Keep Alive IP:
Manually enter the Keep Alive IP Address to be used for ping operation to check
if the connection is still on.
Check Interval 5 x ___ Seconds:
Default is set to 1
(5 seconds). Setup a timer to ping the
keep alive IP.
Background Ping:
Select
Yes
to keep the 4G/LTE active at all time, prevent BEC 4G/LTE ODU from
entering idle state.
Background Ping IP:
Enter the IP address that the BEC 4G/LTE ODU can ping the IP address.
Default Route:
Select
Yes
to use this interface as default route interface.
NAT:
Select this option to Disabled/Enable the NAT (Network Address Translation) function. Enable
NAT to grant multiples devices in LAN to access to the Internet through a single WAN IP.
When router’s Internet configuration is finished successfully, you can go to the Status to check
connection information.
MTU:
Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) an IP attempts to send through the interface.
0
means to use default MTU size, 1500byte.
Click
Save
to apply settings.
