Device Configuration
Interface Setup –
Internet (4G/LTE)
50
BEC 6900 R21 / RidgeWave 6900 User Manual
Period:
Pick a period,
Month
or
Day
.
Mode:
Include
Volume-based
and
Time-based
control.
Volume-based
include “only Download”, "only Upload”, and “Download and Upload” to limit
the flow.
Time-based
control the flow by providing specific hours per month.
720 hours
if selected period
Month
12 hours
if selected period
Day
The billing period begins on
the beginning day of billing each month.
Over usage allowance action:
Here are actions to perform when mobile data usage, defined in
Mode
, reached to its maximum.
None:
No action taken
Disconnect:
Disconnect mobile connection
Email Alert:
Send an e-mail alert and keep the mobile connection alive.
Email Alert and Disconnect:
Disconnect mobile connection after an alert e-mail is being
sent.
Save the statistics to ROM:
Every hour:
Activate the 4G/LTE statistics on data usage and this info will get updated and
saved to the internal memory (ROM) in every hour.
Once the feature is turned on, you can see the amount of data used and how many days
left before next billing cycle starts. Go to
Status >> 4G/LTE Status
page for details.
NOTE:
This statistic information will get deleted after a factory reset.
Disable:
No action taken
LTE PCI Lock: Enable
to force the BEC 4G/LTE ODU to connect with the specific
Earfcn
and
Physical Cell ID
.
Network Mode:
Select a cellular mode. Select
Automatic
to auto detect
the best mode for you.
LTE Band:
Display a list of available LTE bands to choose from.
TEL No.:
The dial string to make a 4G/LTE user internetworking call. It may provide by your mobile
service provider.
Dual APN:
BEC 4G/LTE ODU can support up to two (2) APNs. Select
Single
or
Dual
.
APN:
An APN is like a URL on the WWW, it is what the unit makes a GPRS / UMTS call. The service
provider can attach anything to an APN to create a data connection, requirements for APNs varies
between different service providers. Most service providers have an internet portal which they use to
connect to a DHCP Server, thus giving you access to the internet.
Authentication Protocol:
Manually specify CHAP (Challenge Handshake Authentication Protocol)
or PAP (Password Authentication Protocol). When using PAP, the password is sent unencrypted,
while CHAP encrypts the password before sending, and also allows for challenges at different
periods to ensure that an intruder has not replaced the client.
