BEC 9800VN, Руководство пользователя

Страница: 84 / 127

Device Configuration /
Advanced Setup
80
BEC 9800VN User Manual
Bronze service (H) Class 3, Bronze (011110)
Bandwidth Base: Select SFP or EWAN as the bandwidth base whose upstream/downstream data
rate is pre-set in the previous page.
Ratio: The rate percent of each application/policy compared to total traffic on the interface. For
example, we want to only allow 20% of the total data ( note that the Bandwidth base, the ratio is based
on the bandwidth base)for the LAN-to-WAN direction to be used for FTP server. Then we can specify
here with data ratio = 20.
Priority: Set the priority given to each policy/application. Specify the priority for the use of bandwidth.
You can specify which application can have higher priority to acquire the bandwidth. You may adjust
this setting to fit your policy / application.
Internal IP Address: The IP address values for Local LAN devices you want to give control.
Internal Port: The Port number on the LAN side, it is used to identify an application.
External IP Address: The IP address on remote / WAN side.
External Port: The Port number on the remote / WAN side.
Time Schedule: Select or set exactly when the rule works..
For example, you can give outgoing VoIP traffic more bandwidth to ensure the quality of
bandwidth-sensitive audio service.