Configuring Your Router
Security
– Time Restriction
134
BEC 8920AC User Manual
Time Restriction
A MAC (Media Access Control) address is the unique network hardware identifier for each PC on your
network’s interface (i.e. its Network Interface Card or Ethernet card). Using your router’s MAC
Address Filter function, you can configure the network to block specific machines from accessing your
LAN during the specified time.
This page adds time of day restriction to a special LAN device connected to the router. To
Restrict
LAN device(s), please click Add button to add the device(s) from accessing internet under some set
time. To find out the MAC address of a window based PC, go to command window, and type
“ipconfig/all”.
Note:
The maximum entries configured: 32.
Click
Add
to add the rules.
Host Label:
User-defined name.
MAC Address:
Enter the MAC address(es) you want to allow or block to access the router and LAN.
The format of MAC address could be: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx. For convenience, user
can select from the list box.
Days of the week:
Select the days of a week the rule takes efforts.
Start Time:
Enter the start time of each day in hh:mm format. Leaving it empty means 00:00.
End Time:
Enter the end time of each day in hh:mm format. Leaving it empty means 23:59.
Click
Apply
to confirm your settings. The following prompt window will appear to remind you of the
attention.
Example:
Содержание 8920AC
Страница 12: ...Introduction Network Application Diagrams 1 BEC 8920AC User Manual Network Application Diagrams...
Страница 61: ...Configuring Your Router Quick Start Wizard 50 BEC 8920AC User Manual...
Страница 140: ...Configuring Your Router Security IP Filtering Outgoing 129 BEC 8920AC User Manual Rule inactive...
Страница 167: ...Configuring Your Router NAT Port Triggering Example 156 BEC 8920AC User Manual...
